Claret Upholstery: 100% Silicone and 100% Polyester Double Knit Backing
Copper Upholstery: 100% Polycarbonate Polyurethane Surface, 65% Polyester, 35% Rayon Backing
Leg Finish: Almond on Beech
Claret Upholstery Care:
Clean with mild detergent or shampoo, foam or water-free solvent as desired. Do not saturate with liquid. Cushion covers should not be removed and dry cleaned or laundered. Diluted bleach solution can be used, if needed for disinfecting.
• Quickly blot up fresh spills with a dry towel to avoid deep penetration of the stain.
• Pretest a small area before proceeding. To avoid a ring, work with a clean damp cloth from the outside of stain and work inward.
• Use a professional furniture cleaning service for persistant stains and/or when an overall soiled condition has been reached.
• Water-based cleaning agents and foam may be used for cleaning. Mild, water-free solvents can also be used on this fabric. Do not over wet the fabric.
• Up to 20% diluted bleach solution common hospital grade disinfectant cleaners i.e. Virex, Caviwipes, Oxycide, etc. can be used for disinfecting.
•After cleaning, always rinse with fresh water to remove any detergent or cleaning agent residue from the surface of the fabric.
• Please be careful: These instructions are for the fabric only. Some fabric cleaning methods may cause damage to underlying materials used to make the furniture item.
Copper Upholstery Care:
• Wipe up spills as soon as they occur
• Clean with soap and water
• Sanitize using disinfectants such as (1:5) bleach/water solution
• For stubborn stains, wipe off with isopropyl alcohol as soon as possible*
• Thoroughly rinse all solution residue with clean water
• Air dry
Use all cleaning and disinfecting agents safely and as instructed. The use of other cleaning agents, disinfectants, conditioners or protectants not listed above is not recommended as they can
degrade fabric’s performance.
Wood Care :
Care should be taken to protect the finish from sharp, unprotected objects. The wood is finished in a top coat that has a natural characteristic to repel most common liquids used around wood, yet spills or soil marks should be cleaned up immediately to avoid moisture seeping into open-pore areas. Avoid using furniture polish on wood surfaces as it could cause clouding in the finish. Avoid exposing furniture to extreme heat or cold; also avoid wide humidity variance. Avoid exposure of furniture to strong sunlight. Prolonged exposure may change the color of wood beneath the finish.
